Home » VintageKustom.com » Repairing Kustom Amps » K200A Head Cabinet Questions
K200A Head Cabinet Questions [message #24236] Sun, 20 December 2015 17:00 Go to previous message
mister honey is currently offline  mister honey
Messages: 38
Registered: January 2014
Location: eastern blowville heights...
Member
I'm looking for a photo of or dimensions for the wood support blocks inside a K200A head cabinet, that pleat mentions in this old post from December 2012:

"Which K200 head case are you looking for? There is a difference between the K200A series and K200B series cases. A series are about a half inch shallower in the depth of the A models. Bolt patterns are different and there are wood block spacers on the A models to help support the tranny and power transistors."
pleat

Also, what type of bolts were used to attach the K200A chassis into the head cabinet? Flat head, round head, hex head?

Thanks!

Mike

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Burnt PC900
Next Topic: Frankenstein Head: replacement cap values
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Apr #d 04:05:32 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.