Home » VintageKustom.com » Repairing Kustom Amps » K200B (Lost output)
K200B [message #26029] Wed, 05 April 2017 08:18 Go to previous message
stevem is currently offline  stevem
Messages: 4728
Registered: June 2004
Location: NY
Senior Member
Irish77960 had contacted me by pm about a issue with his amp.
He had installed a brite switch in one of the preamp boards that I provided him and things where fine.
While playing the amp he turned it up louder , played more and then heard a loud pop and lost output, but the strange thing is that the pilot lamp was still responding normal to his playing by dimming which is something I have never seen before!

So far in trouble shooting this issue I had him check the output from the amps RCA jack where he said that there is a screaming loud sound coming out if the jack.

My guess at this point is that one of the preamps is oscillating.

Irish77960 , at this point we neeed to pin down what's going on , and I would say that the thing to do is to unhook the Blue audio output wire from each preamp one at a time to see if atleast one channel is working normal and report back.

[Updated on: Wed, 05 April 2017 08:20]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K-250-4 head
Next Topic: K150-8 Loud Thump
Goto Forum:
  


Current Time: Fri Mar #d 04:20:55 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.