VintageKustom.com: Repairing Kustom Amps » Retaining nuts stuck

Home » VintageKustom.com » Repairing Kustom Amps » Retaining nuts stuck (Swapping K300 faceplate)

Show: Today's Messages :: Show Polls :: Message Navigator

Return to the default flat view

Create a new topic

Submit Reply

Retaining nuts stuck [message #26997]

Sun, 23 September 2018 13:01

JDinPA17603 is currently offline

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Ok, I am at wits end. Friend has a 300 that got dropped and the cast faceplate got bent. Good news amp works perfectly. T&R took some repair but decent. I had the entire front from a parts only 300 soIsaid "let's just swap the faceplates. Ahh the innocence of being a naive old man. Took off the knobs and got off all but 4 of the retaining nuts. They are frozen to the shafts of the pots. Soaked in WD40 for days...even did some impacting with a screwdriver. No luck. Suggestions on what to spray these with to free them from the corrosion.

Thanks in advance for the suggestions. Really looking to getting his 300-5 back in shape for him.

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

Report message to a moderator

Send a private message to this user

[Message index]

		Retaining nuts stuck By: JDinPA17603 on Sun, 23 September 2018 13:01
		Re: Retaining nuts stuck By: chicagobill on Mon, 24 September 2018 11:59
		Re: Retaining nuts stuck By: stevem on Mon, 24 September 2018 12:08
		Re: Retaining nuts stuck By: JDinPA17603 on Mon, 24 September 2018 13:39
		Re: Retaining nuts stuck By: stevem on Wed, 26 September 2018 05:48
		Re: Retaining nuts stuck By: JDinPA17603 on Fri, 28 September 2018 01:27
		Re: Retaining nuts stuck By: JDinPA17603 on Wed, 17 October 2018 21:32
		Re: Retaining nuts stuck By: chicagobill on Wed, 17 October 2018 23:00
		Re: Retaining nuts stuck By: IowaBoy on Wed, 17 October 2018 23:12
		Re: Retaining nuts stuck By: JDinPA17603 on Thu, 18 October 2018 08:37
		Re: Retaining nuts stuck By: chicagobill on Thu, 18 October 2018 13:03
		Re: Retaining nuts stuck By: IowaBoy on Thu, 18 October 2018 13:15
		Re: Retaining nuts stuck By: JDinPA17603 on Thu, 18 October 2018 20:17

Previous Topic:	K250-1 bass head
Next Topic:	Restoring K250-4

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

PDF

]

Current Time: Sat Apr #d 10:04:45 EDT 2024

.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.