Home » VintageKustom.com » Repairing Kustom Amps » Challenger Reverb Problem
Challenger Reverb Problem [message #27115] Sat, 01 December 2018 17:16 Go to previous message
ARKustom is currently offline  ARKustom
Messages: 37
Registered: January 2014
Location: United States
Member
I just got one of these and can't get the reverb to work. When I bought it the reverb only made a loud hum when the knob was turned up, so I got the guy to come off the price. When I opened it up to clean and inspect connections, one of the reverb springs was loose. The ferrite beads were loose in the reverb pan, so I bought a replacement pan. I got it today and connected it, still no reverb. It will crash, so the output works, The background hum increases when the reverb knob is turned up (not like the loud hum before), but there is still no reverb effect. Any ideas? It seems like none of the signal is getting diverted through the reverb tank.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K300 help
Next Topic: K200A-1 Power Amp Rescue Needed
Goto Forum:
  


Current Time: Sat Dec #d 09:18:14 EST 2019
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.