VintageKustom.com: Repairing Kustom Amps

Re: Kustom 100 issues [message #27141 is a reply to message #27140]

Fri, 21 December 2018 06:20

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

there are 4 screws on the bottom of the cabinet ( not the ones that hold the metal feet on) remove them and the chassis will slide out from the rear.

There is a glass fuse inside mounted near the on/ off switch and if it's blown / open then it's time to take the amp to a repair tech.
If the fuse is good then the wall plug end of the power cord may have gone bad.

Report message to a moderator