Home » VintageKustom.com » Repairing Kustom Amps » K200A-1 Power Amp Rescue Needed (Serial Number 20466)
Re: K200A-1 Power Amp Rescue Needed [message #27257 is a reply to message #27255] Sat, 20 April 2019 15:10 Go to previous messageGo to previous message
JDinPA17603 is currently offline  JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA
Member
Bill he lists a PC602 board, wouldn't that mean he should also have or need a PC502 board and the "missing" power transistor? Schematic I have shows the 602 as the minus supply and 502 as the positive supply. Just to double check went down to my bench. My A without effects just has a PC502 board in it with space (holes) in the chassis for an additional board. It is the positive regulator. The other unit with effects has both the boards a PC502 positive regulator and a PC602 negative regulator. While this should have nothing to do with his voltage on the speaker jack it will affect the units ability to function if he truly only has a 602 board along with the driver / output board on the back wall. Unless someone cobbled a +24volt supply out of zeners.

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Sat, 20 April 2019 16:02]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Challenger Reverb Problem
Next Topic: Kustom 100 blowing fuse
Goto Forum:
  


Current Time: Mon Apr #d 12:43:05 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.