Home » Classified Ads » Wanted » K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism (Why would someone remove and discard it like that?)
Re: K250-4 Reverb Tank Assembly w/ Shockmounts and Locking Mechanism [message #27311 is a reply to message #27310] Tue, 14 May 2019 07:36 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4733
Registered: June 2004
Location: NY
Senior Member
Unles you find a donor 150 ,250 or 300 pa head these shock mounts are very hard to come by !

What I have done is to get 8 short machine screws and nuts and them embedded the screw heads in clears silicone bath tube sealer.
This is a two step process.
First I place a 1/4" dab of sealer on the head of a screw and then push another screw agonist it so that there is still 1/8" between the head of each screw.
Do this on wax paper and let it set up overnight, the next day pack more sealer around the 2 screw combo to retain them to each other better.
When you do the final Assy of the pan back in the amp do not tighten up the nuts too much or you will spin out the screws, but this method does work!

[Updated on: Tue, 14 May 2019 07:37]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: white guitar
Next Topic: Looking for 1 power cord wrap post for K200 B1
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Apr #d 20:42:16 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.