Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)
Re: Kustom III lead pc board 5065 rev2 [message #27357 is a reply to message #27347] Thu, 06 June 2019 07:19 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4733
Registered: June 2004
Location: NY
Senior Member
I looked at the picture of the 5065 board you sent me and I need to pull one of my amps open to compare , but I do see that the resistor goes to the base of that to92 cased black transistor so I will try and figure it out from that in a bit if I can.

The other thing is that the resistor you question is a metal film type and they can look pretty darn bad yet still check out close the there original resistance and work!

You might want to ohm check it and report back , but the other need is to find out why it burned up in the first place, and all I can tell you for sure is that the black transistor to its left is not original and may not be right for the circuit!

Can you read a number off of that transistor?
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 100 blowing fuse
Next Topic: Troubleshooting a 250 model 1 Bass amp
Goto Forum:
  


Current Time: Sun Apr #d 20:47:05 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.