Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)
Re: Kustom III lead pc board 5065 rev2 [message #27381 is a reply to message #27347] Sun, 09 June 2019 09:21 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4733
Registered: June 2004
Location: NY
Senior Member
The 4 resistors you question are the 681 ohm 1% resistors and I think Kustom may have lost track of things because the schematic calls out all resistors to be 1/2 watters and these 4 are .250 watt resistors!

I would replace all 4 of these with 1/2 watt 1% metal film type resistors and then give the amp a good long test out up at atleast a 80 watt RMS output level to confirm they will not run hot again.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 100 blowing fuse
Next Topic: Troubleshooting a 250 model 1 Bass amp
Goto Forum:
  


Current Time: Sat Apr #d 12:09:25 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.