Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)
Re: Kustom III lead pc board 5065 rev2 [message #27391 is a reply to message #27347] Sat, 15 June 2019 06:23 Go to previous message
stevem is currently offline  stevem
Messages: 4733
Registered: June 2004
Location: NY
Senior Member
Great new to hear!

Note that on these metal face amps the 2 input jacks for each channel are a different level of gain, not tone as on the non metal face Kustom amps.

Each jack has a built in shorting switch in it as many amps do and if they are clean will not add any hum , especially if the volume is down, reverb will always add some level of hum on most any amp that has the reverb pan mounted less than 8 to 10 inches away from the power transformer!
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 100 blowing fuse
Next Topic: Troubleshooting a 250 model 1 Bass amp
Goto Forum:
  


Current Time: Sat Apr #d 18:27:23 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.