Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)
Kustom III lead pc board 5065 rev2 [message #27347] Wed, 05 June 2019 10:19 Go to previous message
podbaydoors is currently offline  podbaydoors
Messages: 7
Registered: June 2019
Junior Member
Hi all,

Just signed up for the forum.
I realize that this forum is primarily Tuck 'n Roll ( I used to have a Tuck 'n Roll head, last I heard it was in Vancouver ) but my question today for those wiser than me regards a Kustom III Lead.
It is all original, and still working after a fashion.
All the electrolytic caps will be replaced which should help to preserve it's operating status for a good many more years.
The question I have regards one resistor on the PC 5065 rev 2 board.
The second from the right 1/4 watt brown bodied resistor that obviously was overheated.
Does anyone have the schematic / layout info on this board in this revision?
Can anyone tell me what the value of this resistor is supposed to be?

Best regards,

Lou

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 100 blowing fuse
Next Topic: Troubleshooting a 250 model 1 Bass amp
Goto Forum:
  


Current Time: Thu Mar #d 06:19:01 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.