Home » VintageKustom.com » Repairing Kustom Amps » Troubleshooting a 250 model 1 Bass amp (250 Model 1 needs help!)
Re: Troubleshooting a 250 model 1 Bass amp [message #27395 is a reply to message #27394] Tue, 25 June 2019 17:04 Go to previous messageGo to previous message
Byteviolator is currently offline  Byteviolator
Messages: 13
Registered: June 2019
Junior Member
Hi Steve,

Thanks for your input. I think I may have overestimated my troubleshooting skills!
1) The two main filters are a easily reversible fix, they are still in place.
2) Should I start with Q1 on the 5065 and work my way through or start with the power transistors Q10 - Q13?
3) Should I also be looking at the caps on 5065.
4) With the 3 wires connected to the 5065, I'm measuring about 43mV on the output jack when the amp is on

I've changed the power cable to a 3 pronged because I was getting zapped while unplugging the input jack and holding the chassis (should have taken that as a warning to slow down)

Thanks again
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom III lead pc board 5065 rev2
Next Topic: Kasino u100-p (Club) and u200-p (Concert) repair
Goto Forum:
  


Current Time: Sat Apr #d 06:14:57 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.