Home » VintageKustom.com » Repairing Kustom Amps » Troubleshooting a 250 model 1 Bass amp (250 Model 1 needs help!)
Re: Troubleshooting a 250 model 1 Bass amp [message #27406 is a reply to message #27405] Mon, 01 July 2019 11:25 Go to previous messageGo to previous message
Byteviolator is currently offline  Byteviolator
Messages: 13
Registered: June 2019
Junior Member
Hi Bill,

Thank you so much for your help. I've replaced the op-amps on both pre-amp boards and now the amp works and sounds great, the sound is incredible! I installed 8 pin sockets, used the 4558 and rewired the board in that section. The original filter caps are in place. Do I need to keep it powered on for a few hours to reform the caps or is that unnecessary? Next I want to get the lights in front to work.
Thanks again for your time and advice.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom III lead pc board 5065 rev2
Next Topic: Kasino u100-p (Club) and u200-p (Concert) repair
Goto Forum:
  


Current Time: Sat Apr #d 06:32:19 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.