Home » VintageKustom.com » Replacement Part Suggestions » Altec driver replacement (Emminence PSD 2002-8/16)
Altec driver replacement [message #27579] Sun, 10 November 2019 08:56 Go to previous message
johnnysynth is currently offline  johnnysynth
Messages: 45
Registered: June 2018
Member
This emminence driver handles 80W with frequency response of 1.2K to 20K
It probly bolts right up to an Altec 811B horn which
looks like what was in the old T&R cabs equiped with HF drivers.
Don't really know what Bud used for a crossover. The
Altec brand would have probly been a N800-D 800hz unit.
I'm going to try this out myself so I thought I'd put this
idea out here for discussion. The mystery is. . .what X-over
to use?
I'm trying to'PUT' one
of these cabs together from separate modern parts
to wind up with the original T&R cab but with
JBL K130's and one of these modern Emminence drivers.
By theory at least it should kick ass.
Jake Welsh- johnnysynth@yahoo.com
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: 3055 vs 3771 power transistors
Next Topic: Hustler Reverb Tank
Goto Forum:
  


Current Time: Thu Mar #d 22:22:14 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.