VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Hustler Reverb Tank (Input output impedance)

Show: Today's Messages :: Show Polls :: Message Navigator

Re: Hustler Reverb Tank [message #27589 is a reply to message #27584]

Tue, 12 November 2019 12:32

stevem
Messages: 4733
Registered: June 2004
Location: NY

Senior Member

Just remember that when you mount it the output side of the tanks needs to be as far away from the power transformer as you can get it if you want minimal hum.
And in that same vein the cables should be well made in the shielding dept.

Report message to a moderator

[Message index]

		Hustler Reverb Tank By: JDinPA17603 on Mon, 11 November 2019 22:40
		Re: Hustler Reverb Tank By: stevem on Tue, 12 November 2019 07:31
		Re: Hustler Reverb Tank By: JDinPA17603 on Tue, 12 November 2019 09:19
		Re: Hustler Reverb Tank By: chicagobill on Tue, 12 November 2019 11:49
		Re: Hustler Reverb Tank By: JDinPA17603 on Tue, 12 November 2019 12:28
		Re: Hustler Reverb Tank By: carlc on Wed, 13 November 2019 08:15
		Re: Hustler Reverb Tank By: JDinPA17603 on Mon, 09 December 2019 16:35
		Re: Hustler Reverb Tank By: stevem on Tue, 12 November 2019 12:32
		Re: Hustler Reverb Tank By: JDinPA17603 on Tue, 12 November 2019 19:33

Previous Topic:	Altec driver replacement
Next Topic:	K200B-6

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Apr #d 17:14:07 EDT 2024

.:: Contact :: Home ::.