Home » VintageKustom.com » Replacement Part Suggestions » Hustler Reverb Tank (Input output impedance)
Re: Hustler Reverb Tank [message #27590 is a reply to message #27589] Tue, 12 November 2019 19:33 Go to previous message
JDinPA17603 is currently offline  JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA
Member
Steve, no issue with the tank and transformer hum with the head being a Hustler from the combo the pan is external to the amp and the amp itself is enclosed. After talking with Bill an looking at the schematic is ordered a 4FB3C1B as the schematic shows the pan going to ground. Ordered it through Amplified Parts...that website is quite a resource, especially with regard to reverb pans. Thanks again to both of you for your help. I will be using high grade RCA cables with the new pan.

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Tue, 12 November 2019 19:34]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Altec driver replacement
Next Topic: K200B-6
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Apr #d 11:41:10 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.