Home » VintageKustom.com » Repairing Kustom Amps » Kustom 250-4 (rebuild amp parts)
Kustom 250-4 [message #27628] Thu, 09 January 2020 12:23 Go to previous message
johnnysynth is currently offline  johnnysynth
Messages: 45
Registered: June 2018
Member
I'm rebuilding a Kustom 250-4 amp. It works but is noisey and distorts in the high end frequencies
with my Wurlitzer Electric Piano. Right now rebuilding the (2) preamp sections starting with
the 14pin dual op-amps XR4739/nte725 uA739
This part is not listed in Mouser or Digikey
Any clues on this or any other -hard to find- devices
in the pre-amp section?
I replaced the two 'big can' electrolytics already
in the pwr. supply and that brought the
idyl noise down considerable
That's as far as I've gotten
Jake Welsh
johnnysynth@yahoo.com
808 755-5886
Saint Augustine, FL
1/9/20
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom PA 300-5 and 150 bass combo chassis mounting screws
Next Topic: K100 2 Questions
Goto Forum:
  


Current Time: Thu Mar #d 17:46:18 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.