Home » VintageKustom.com » Repairing Kustom Amps » Woodson 150-2 ( Kustom Line of Amps ) (Schematic for Woodson 150-2)
Woodson 150-2 ( Kustom Line of Amps ) [message #27885] Sun, 11 October 2020 09:04 Go to previous message
jammy5152 is currently offline  jammy5152
Messages: 61
Registered: May 2018
Location: Georgia
Member

I understand that Woodson was part of the Kustom / Kasino line of amplifiers...Correct me if I am wrong....
I have a 60 cycle hum coming from the amp and I cannot find the schematic for this amplifier...
It is a Woodson 150-2 and the circuit board number is PC5116 which is not listed on the website Vintage Kustom
I have been told that the hum problem could be a grounding issue or the possibility of capacitor problems....
It has 2 large blue can capacitors in it which I have not tested at this time...I know without a schematic for it, is guessing at the problem....It has a 33uf @ 10% / 100 volt cap soldered in at the Master volume Pot which looks to be damaged which I am going to replace..( someone turned the front nut to tighten up the pot and broke the end off ...still works though )
Any ideas or help would be helpful......

[Updated on: Sun, 11 October 2020 09:05]

Report message to a moderator

 
Read Message
Read Message
Read Message
Previous Topic: Kasino K200 Issue
Next Topic: PC 5129 R3
Goto Forum:
  


Current Time: Sat Apr #d 16:19:18 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.