Home » VintageKustom.com » Repairing Kustom Amps » Strange PC102 Board (Going insane... quickly.)
Strange PC102 Board [message #28450] Mon, 14 February 2022 20:13 Go to previous message
JDinPA17603 is currently offline  JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA
Member
Amp is end of A series A4.
Background 100uf white Mallory cap had split amp had set for number of years. In consult with the owner we decided to replace all of the Mallory caps that were in the amp and then other parts as needed. Long story short - 95% of all components on the board were more than 20% out of tolerance and that was from the stated values. So I pulled up my PC102 schematic and where the schematic showed 3 ea of 25 uf these boards had 4 and no a 25 had not been subbed for a 10 uf or for the 100 uf.
Upon further digging we find we have 25 fixed resistors instead of 23. I've taken shots of the component and trace side of the board trying to trace through but to be honest my head is swimming right now.
The board just says Ross PC102 but like I said totally different from the PC102 schematic I have.
If anyone can shed light on this or provide a schematic it would be a great help.
Thanks in advance.


Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Mon, 14 February 2022 20:24]

Report message to a moderator

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Please help me identify all capacitors on pc 5131 revo
Next Topic: PC602 help/schematic
Goto Forum:
  


Current Time: Sun May 26 01:48:40 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.