Home » VintageKustom.com » Repairing Kustom Amps » Kustom Bass III Channel 1 Hiss (extreme amount of hiss on channel 1 board (PC5127))
Re: Kustom Bass III Channel 1 Hiss [message #28686 is a reply to message #28685] Fri, 22 July 2022 10:03 Go to previous messageGo to previous message
thespeakerport is currently offline  thespeakerport
Messages: 11
Registered: July 2022
Junior Member
Each channel board has two molex connectors...one that goes to the input jacks and the other for power and signal output. The hiss is present if you have then connector that goes to the input jacks plugged in or not. I will absolutely post the schematic in about an hour when I get back to my shop.
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom IV Bass Power Supply Caps
Next Topic: K200 Bright Channel is ALIVE...
Goto Forum:
  


Current Time: Sun Apr #d 13:52:57 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.