Home » VintageKustom.com » Replacement Part Suggestions » Suggestion for replacement filter caps on K200A-2?
Suggestion for replacement filter caps on K200A-2? [message #28889] Wed, 11 January 2023 09:36 Go to previous message
claussoegaard is currently offline  claussoegaard
Messages: 27
Registered: July 2022
Junior Member
Inside my K200A-2 are two gigantic 4500uF (50V) can caps, with screw terminals on the top. I'm sure this is common in all/most Kustoms from that era. My question - does a suitable replacement for these exist? I'm sure I could find some 4500uF (50V) caps, but I'm thinking more about something in the same or similar form factor?

I don't necessarily have any reason to think they're bad per se, but one measures 6536uF and the other 5340uF on my Fluke, so they're at least a bit out of spec.

I tried searching the forum, but couldn't find anything. Maybe my searching skills need improving. Thanks in advance!

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Screws for back of Kustom Cabs
Next Topic: Replacement fuse in K200A-2 after 110 -> 230V conversion
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Apr #d 00:34:54 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.