Home » VintageKustom.com » Repairing Kustom Amps » Anyone out there for Kustom Kombo II organ questions? (All of a sudden, just got a ton of "white noise" coming through both outputs.)
Anyone out there for Kustom Kombo II organ questions? [message #29014] Fri, 07 April 2023 20:35 Go to previous message
sskydiver1 is currently offline  sskydiver1
Messages: 27
Registered: December 2008
Location: Texas
Junior Member
Hello Out There!

I fired up my Kustom Kombo II organ after many months of inactivity - and was so happy that it seemed to work as it always had - every key, every slider, every side button, basically everything worked just fine.

I have always gone out of the "Expression Pedal" output to my amp or PA, as this output was always way hotter than the other 1/4" jack output right next to it.

After playing the organ for awhile, I think what happened is that I decided to try the other output to see how it was faring,and it was low as usual, and when I plugged back into the "Expression Pedal" output I noticed a ton of "white noise" not ground hum coming at me. Every function on the organ still works, but the white noise is so significant it is really unplayable.

I'm not 100% sure that the issue emanated from my switching between the outputs - but it happened around the time I did the output jack switching.

I of course tried different cables, different amps, different wall circuit, etc etc, but the organ is just generating a ton of "white noise".

I even tried an EbTech hum eliminator, but it's not 60 cycle hum.. I know that when I hear it.

Sure hoping I get some ideas from you fellow Kustom enthusiasts. The thought of hauling this thing in to a local tech gives me stomach pains - these aren't your Average Bears, and any ideas for who can repair this thing anywhere in the mid-South (AZ - Texas - Oklahoma - Louisiana) - please let me know!

Many Many Thanks to my fellow Kustom Heads!

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200A-2 -- Very hot R1 (5W 200ohm)
Next Topic: Schematic for 695 PA
Goto Forum:
  


Current Time: Sun Apr #d 22:59:11 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.