VintageKustom.com: Repairing Kustom Amps » Missing pedals for K250-4

Home » VintageKustom.com » Repairing Kustom Amps » Missing pedals for K250-4

Show: Today's Messages :: Show Polls :: Message Navigator

Re: Missing pedals for K250-4 [message #4481 is a reply to message #4437]

Mon, 12 July 2004 09:06

VinceG2
Messages: 26
Registered: April 2004

Junior Member

Don, you mentioned having a picture showing the pedal for the #2 K250? Can you send me that as well?

The thing is, my XLR connector does not have 6 pins, but rather only 4 pins.

From talking with Les, we had determined that my amp was probably from the first batch of K250s made.
I'm assuming that if this is true, then there are subtle differences from the first batch, then what became standard.

Report message to a moderator

[Message index]

		Missing pedals for K250-4 By: fieldflower on Wed, 07 July 2004 16:20
		Re: Missing pedals for K250-4 By: pleat on Fri, 09 July 2004 09:46
		Re: Missing pedals for K250-4 By: fieldflower on Fri, 09 July 2004 10:05
		Re: Missing pedals for K250-4 By: pleat on Sat, 10 July 2004 12:38
		Re: Missing pedals for K250-4 By: fieldflower on Sat, 10 July 2004 14:06
		Re: Missing pedals for K250-4 By: pleat on Sun, 11 July 2004 12:03
		Re: Missing pedals for K250-4 By: VinceG2 on Sat, 10 July 2004 21:26
		Re: Missing pedals for K250-4 By: pleat on Sun, 11 July 2004 12:09
		Re: Missing pedals for K250-4 By: fieldflower on Sun, 11 July 2004 13:33
		Re: Missing pedals for K250-4 By: pleat on Sun, 11 July 2004 18:13
		Re: Missing pedals for K250-4 By: fieldflower on Sun, 11 July 2004 18:49
		Re: Missing pedals for K250-4 By: VinceG2 on Mon, 12 July 2004 08:42
		Re: Missing pedals for K250-4 By: pleat on Mon, 12 July 2004 21:52
		Re: Missing pedals for K250-4 By: VinceG2 on Tue, 13 July 2004 00:51
		Re: Missing pedals for K250-4 By: chicagobill on Tue, 13 July 2004 11:40
		Re: Missing pedals for K250-4 By: VinceG2 on Wed, 14 July 2004 03:30
		Re: Missing pedals for K250-4 By: VinceG2 on Mon, 12 July 2004 09:06
		Re: Missing pedals for K250-4 By: KustomBlues on Mon, 12 July 2004 10:44

Previous Topic:	K200B1
Next Topic:	Pot specs for boost pedal?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed May #d 15:41:50 EDT 2024

.:: Contact :: Home ::.