VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Using Line Out on my LeadIII (Can I use “line out” to drive my old Standell slave amp?)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Using Line Out on my LeadIII [message #29403] Sun, 15 December 2024 13:31
LesinTucson is currently offline  LesinTucson
Messages: 1
Registered: December 2024
Junior Member
I recently purchased a 1977 Kustom Lead III to take the place of my blown amplifier on my 1960s Standell Super Artist amplifier. So far so good. I have pretty good sound coming out of the cabinet now I want to hook up my old Standell slave, but do not want to blow up the amplifier doing it. Can I use the line out signal directly into my Standell slave?

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: 250-4 Screw specification
Next Topic: seeking repair shop NY / Metro area for Kustom K150-8
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Jul 16 10:06:30 EDT 2025
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software