VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » Classified Ads » For Sale » 1987 PA System K8300 Powered Mixer & K1500H 15" Speakers - Cascade R&P (Asking $1100 + Shipping -- See Details)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
1987 PA System K8300 Powered Mixer & K1500H 15" Speakers - Cascade R&P [message #29579] Fri, 30 May 2025 00:00
plsde302 is currently offline  plsde302
Messages: 3
Registered: May 2025
Junior Member
Search "1987 Kustom PA System 300W - K8300 Powered Mixer & 2 K1500H 15" Speakers - Cascade R&P Tuck & Roll" on Reverb for photos.

This PA System catches some serious attention right out of the gate with its stunning blue/green sparkled Cascade Roll & Pleat (R&P/ "Tuck & Roll") exterior. The set is presumed to be exactly as it came from the factory in 1987, with consecutively-serialized speakers and matching powered mixer. Marked with Kustom Music Inc., Fayeteville, TN as well as quality control tags in each speaker with an inspection date of 03/11/1987 (shout out to all the 311 fans).

The K8300 Mixer/Amplifier is an 8-channel mixer with two 160W/4Ohm power amps (1x Main, 1x Monitor) featuring level, bass, treble, and reverb sends on each channel, Main Level, Monitor Level, various reverb/FX/tape patching, and a 7-band equalizer for each power amp. Line/XLR inputs, 1/4" outputs, including a headphone jack. Serial number 2859.

The K1500H speakers feature 2-way 15" woofers and Pyle Driver horns in a heavy duty cabinet. Serial numbers 2867/2868.

All 8 channels work great through both Main/Monitor Power Amplifiers. All pots, faders, and boards have been cleaned. One of the Main outputs does not have threading or a retention nut as shown. Channel 2 Bass potentiometer was replaced at some point, which does not feature a mid-position detent like the rest. Equalizer faders have just the slightest bit of ground noise when moving them. One speaker horn has a small crack as shown. R&P has very light road rash (small scuffs, light debris, minor tears in isolated areas). Some light debris may still exist in the cracks and crevices, but could be cleaned up to amazing condition.

Shipping will involve three separate packages, which is factored into the shipping rate. Will also be happy to deliver within a 400mi/8 hour radius of 19938 for $0.45/mi.
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Metal face power and polarity switches
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Jul 16 10:37:11 EDT 2025