VintageKustom.com: Repairing Kustom Amps » K200 B-2 Dead Bright channel

Home » VintageKustom.com » Repairing Kustom Amps » K200 B-2 Dead Bright channel (Faulty Bright channel on a 1969 Kustom K200 B-2)

Show: Today's Messages :: Polls :: Message Navigator

K200 B-2 Dead Bright channel [message #29637]

Thu, 26 June 2025 23:48

joaoburatto
Messages: 3
Registered: June 2025

Junior Member

Recently got a Kustom K200 B-2. The bright channel seems to have been damaged during shipping.

No guitar sound is going through, but when I turn the knobs around I can hear some cracking/hissing, reverb also works when I tap it a bit.

Other channel works perfectly. No visible damage on the board? at least from my unexperienced eyes.

No ideas what to do, I'm not a tech, reasonable soldering skills.

Report message to a moderator

Re: K200 B-2 Dead Bright channel [message #29697 is a reply to message #29637]

Tue, 19 August 2025 09:16

Voxman2027
Messages: 34
Registered: November 2024

Member

Jo,
Did you get it fixed? Have you opened the amp up and physically inspected for any loose or damage components?
I can help but I need to know what you've done so far.
This forum is kinda flaky and doesn't seem to have the best user response. Since I've encountered sparse response I thought maybe I could help out other folks.
One the absolute best techs on here is "Stevem" so you can try posting to him for help too.
Best regards
Gary

Report message to a moderator

Previous Topic:	KUSTOM K150-6 Head not behaving nicely
Next Topic:	PHOTO of PC5035/5036 PCB's

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Feb 15 06:29:02 EST 2026