VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » K150 - soft clean, loud distortion
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K150 - soft clean, loud distortion [message #6070] Wed, 10 August 2005 20:07 Go to next message
KustomAddict
Messages: 14
Registered: March 2004
Junior Member
Hey Kustom guys,

It's been a while since I posted anything, but I hadn't had any problems till now. I've got a K150 with the slanted front and metal front. It's got reverb and tremelo on it. Well, the other day I was jamming on it and I switched my distortion off and noticed that the volume seemed low, then I hit the distortion again and it's back to super loud. While clean there is no hum, static, or any other weird sound. It's just that the volume is low except when a distortion pedal is on.
I opened it up and didn't see anything burned, melted, or charred. So I don't know what's up with it. Anybody got any ideas?

Thanx.
Re: K150 - soft clean, loud distortion [message #6071 is a reply to message #6070] Thu, 11 August 2005 01:00 Go to previous messageGo to next message
voided3 is currently offline  voided3
Messages: 200
Registered: July 2004
Senior Member
Hello. It sounds like it may be something with your pedal. Did you try plugging straight into the amp at all? It's possible that the bypass circuit on your pedal may be screwed up a bit. Good luck!
Re: K150 - soft clean, loud distortion [message #6073 is a reply to message #6070] Thu, 11 August 2005 12:45 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4888
Registered: June 2004
Location: NY
Senior Member
Do both channels act the same, if not than you may have damaged the the first gain stage in the channel you where playing thru . these amps where not designed to have the input be driven very hard, thats why they offered their own built in distortion. In the future you should use the second input of what ever channel you are in.
Re: K150 - soft clean, loud distortion [message #6079 is a reply to message #6070] Thu, 11 August 2005 17:29 Go to previous messageGo to next message
KustomAddict
Messages: 14
Registered: March 2004
Junior Member
yeah, i tried plugging it in straight from the guitar w/o a pedal and it sounds the same(lowered volume) and both channels, both inputs. so i'm still stuck.
Re: K150 - soft clean, loud distortion [message #6085 is a reply to message #6070] Fri, 12 August 2005 12:35 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4888
Registered: June 2004
Location: NY
Senior Member
If this is a mult- speaker amp, check to see that all the speakers are working.
Re: K150 - soft clean, loud distortion [message #6089 is a reply to message #6070] Sat, 13 August 2005 15:23 Go to previous message
KustomAddict
Messages: 14
Registered: March 2004
Junior Member
Yeah, both speakers are working fine. Any other ideas what might be wrong?
  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Power Amp Questions
Next Topic: Cleaning/conditioning T&R
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Fri Aug 14 12:02:08 EDT 2026