VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » metal face 150 /250 tips
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
metal face 150 /250 tips [message #6598] Tue, 31 January 2006 08:27
stevem is currently offline  stevem
Messages: 4886
Registered: June 2004
Location: NY
Senior Member
In these heads the output signal of the top channel goes thru the lower channel. So if you have a good upper preamp but a bad 14 pin IC chip on the lower one, or if the lower one is not pluged in, both channels will have zero output.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: PC402A and 402B/ clipper/ boost
Next Topic: Please! Can anyone help me with my Kustom Commander Combo?
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Jul 14 15:29:51 EDT 2026
.:: Contact :: Home ::.

Powered by: FUDforum 3.2.0.
Copyright ©2001-2025 FUDforum Bulletin Board Software