VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Non working channels

Show: Today's Messages :: Polls :: Message Navigator

Non working channels [message #984]

Sun, 04 November 2001 22:25

KomboKing
Messages: 44
Registered: June 2001
Location: Northern Kentucy

Member

Of late one of thr channels in my K-200-B-1 isn't working. It seems to be a common problem......What's up with this, anyone know?

Report message to a moderator

Re: Non working channels-Volume Drop [message #1002 is a reply to message #984]

Fri, 09 November 2001 12:18

Anonymous

Both of the channels in my 200B-1 still work. However, the volume in the "Bright" Channel is considerably less than in the "Normal" Channel. I don't know why???

Report message to a moderator

Re: Non working channels [message #1142 is a reply to message #984]

Thu, 13 December 2001 23:53

KustomBlues
Messages: 495
Registered: June 2001
Location: Michigan

Senior Member

I was talking to Gary about Kustoms, and he said that usually the cause of a dead channel is that the first transistor in the dead channel has been static zapped to death.... He said it is a common problem. Hopefully, this solves your problem.

Report message to a moderator

Re: Non working channels [message #1220 is a reply to message #1142]

Fri, 04 January 2002 17:15

Anonymous

I agree with Deb and Gary.....One of my 200 was channel zapped by a soundman at a blues festival. Took out the first two transistors in the circuit. Good luck! BC

Report message to a moderator

Previous Topic:	200B-1 "Whooshing"/RF interference
Next Topic:	Kustom 2-15 cab question

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Jan 25 00:45:05 EST 2026