VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 300

Show: Today's Messages :: Polls :: Message Navigator

Kustom 300 [message #994]

Thu, 08 November 2001 16:14

Anonymous

Reverb is dead and the can/spring is good. I am looking at DC volts on the sleeve of the RCA input to the reverb can. I am in DIRE NEED of a schematic. Can anyone point me towards a schematic please??????? Kustom 300, 6 channel, 12 input, 150w RMS out.

Report message to a moderator

Re: Kustom 300 [message #2600 is a reply to message #994]

Thu, 13 March 2003 16:20

Anonymous

i am having a problem with my own 300. i just copied the schematics from the cover. They are legible but you may have to magnify them.send me your email and i'll email you what i have. vinny

Report message to a moderator

Re: Kustom 300 [message #2612 is a reply to message #2600]

Mon, 17 March 2003 07:44

stevem
Messages: 4863
Registered: June 2004
Location: NY

Senior Member

Hi, plug the preamp/ slave jack, or the recording jack of the 300 into another amp if you can, if it works normal then you problem lies in the output or output driver section.

Report message to a moderator

Re: Kustom 300 [message #3210 is a reply to message #994]

Tue, 04 November 2003 13:34

Roy
Messages: 11
Registered: June 2004

Junior Member

I have 7 pages of schematics and pc board layouts that I got from Kustom, years ago, for the Kustom 300 PA head. E-mail me if you still need them. Roy

Report message to a moderator

Previous Topic:	Reverb? Tremolo? Where to start?
Next Topic:	Kustom Love/schematic wanted

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Jan 25 07:54:57 EST 2026