VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Burnt resistor
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Burnt resistor [message #1392] Fri, 22 March 2002 15:29
Bill
Messages: 64
Registered: March 2002
Location: Kansas
Member
My Kustom III has developed noise/changes of volume, and popping while playing. I found a burnt resistor of unknown value, located directly behind and to the left of the tremelo speed control, next to the first reverb tank connector. Several years ago the reverb tank came loose and dropped down, popping the fuse inside. I didn't notice the resistor at the time. Anyone have info or a schematic I could copy? Or just tell me what the value is? Sorry I have to bring up a "naked" (non tuck and roll) amp, but that's what I have at the moment, till I find a good k200 again. Oughta be some down here close to Chanute, KS, eh? Thanks to all!

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Losing all my lows
Next Topic: kustom250 bass head
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Jul 14 14:49:50 EDT 2026
.:: Contact :: Home ::.

Powered by: FUDforum 3.2.0.
Copyright ©2001-2025 FUDforum Bulletin Board Software