VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Cab ports (suitable substitute)

Show: Today's Messages :: Polls :: Message Navigator

Cab ports [message #20873]

Sat, 05 July 2014 21:26

kasinoman
Messages: 20
Registered: July 2014
Location: Earth

Junior Member

Was missing Bass cab port hole covers, I used Chrome garbage disposal flanges purchased at Lowes for $15. each. They look really cool and authentic and fit the port! Just wanted to share this discovery.
(I would prefer to find the vintage ones if remotely possible? But happy with these.)

[Updated on: Sat, 05 July 2014 21:59]

Report message to a moderator

Re: Cab ports [message #20875 is a reply to message #20873]

Sat, 05 July 2014 21:45

stevem
Messages: 4863
Registered: June 2004
Location: NY

Senior Member

Hey, great substitute !
How long are they?

Report message to a moderator

Re: Cab ports [message #20877 is a reply to message #20875]

Sat, 05 July 2014 22:07

kasinoman
Messages: 20
Registered: July 2014
Location: Earth

Junior Member

1.75" long with diameter of 3.25" and the outter lip is 4.6"

if my math is correct, should read, one and three quarters deep. three and a quarter inch around and the lip is four and a half inches.

Report message to a moderator

Re: Cab ports [message #20878 is a reply to message #20873]

Sun, 06 July 2014 07:37

carlc
Messages: 143
Registered: July 2006
Location: Summerville, SC

Senior Member

How about some pics?

Report message to a moderator

Re: Cab ports [message #20881 is a reply to message #20878]

Mon, 07 July 2014 13:34

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

Hey, listed on Ebay are some black plastic ports that are 3 inches in diameter and 4 1/2 at the flange. I am going to try chrome spray paint and see how it comes out. Figured the diameter issue.....would just wrap electrical tape around the tube until it fit on the mounting bracket. My brother suggested having the ports chromed. Checking into that as well. Problem with drain pipes is that they aren't rounded at the flange....are they?

Report message to a moderator

Re: Cab ports [message #20882 is a reply to message #20873]

Mon, 07 July 2014 13:37

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

Sorry.....missed that you used garbage disposal flange.........was thinking of drain strainer.......Great idea and probably a lot cheaper than having plastic chromed. I'm heading for Menards to see what they have now.

Report message to a moderator