| Schematics in the "technical section"? [message #29648] |
Wed, 02 July 2025 21:18  |
johnhoef
Messages: 1
Registered: May 2025
|
Junior Member |
|
|
Hello, everyone,
I'm new here, and having great difficulty using this forum! Just figuring out how to post as I am doing now took a great deal of time and frustration! But, indeed, I am finally here. Earlier I did send a private message to a very active member concerning my issue. I have no idea if he received it. I suppose a little patience is in order. Meantime, I thought I would try this. I notice it is often mentioned in this forum that there is a "technical section". I spent upwards of an hour trying to find this "technical section" with no success. Perhaps the moderators of this forum could fix that? OK, in the meantime, my point in being here is to get hold of a schematic for a Kustom K 200b-1. So, please, someone, help me to find this "technical section".
A big thanks!!
John
|
|
|
|
| Re: Schematics in the "technical section"? [message #29649 is a reply to message #29648] |
Thu, 03 July 2025 05:15  |
stevem
Messages: 4863
Registered: June 2004
Location: NY
|
Senior Member |
|
|
Hello and welcome.
The site’s technical section is right on the same page that this is on, but it’s in the list of sections on the upper left side of this page.
In that section you can look up your amp by its model number and then get all the schematics for it, or if you already have a PC board number from the amp you can find the schematic you need from that
What is the issue you’re having with your amp?
Also note that for anti spam reasons new board members have to make 5 post that I approve before your next post will go right up to the web board.
Sometimes it can take me 8 hours to get to do that approval process.
Also note that this board does not accept photos so don’t waste time trying.
If you want to post photos go to the vintage Kustom link on FB.
Also note that folks responding to there PMs has nothing to do with this site as I though you might realize.
Who did you send the pm to if you don’t mind me asking?
[Updated on: Thu, 03 July 2025 05:19] Report message to a moderator |
|
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]