VintageKustom.com: Replacement Part Suggestions » Kustom K100-7 Combo Casters?

Home » VintageKustom.com » Replacement Part Suggestions » Kustom K100-7 Combo Casters?

Show: Today's Messages :: Polls :: Message Navigator

Kustom K100-7 Combo Casters? [message #29669]

Tue, 05 August 2025 07:21

Turbotommy
Messages: 1
Registered: August 2025

Junior Member

Hi all….I am new here. I just purchased a K100-7 and was wondering if anyone knew what casters would fit? Thanks!

Report message to a moderator

Re: Kustom K100-7 Combo Casters? [message #29670 is a reply to message #29669]

Tue, 05 August 2025 07:59

stevem
Messages: 4863
Registered: June 2004
Location: NY

Senior Member

Hello and welcome.

I have standard hardware store 2” diameter wheel set on my k100.

These were on mine from when I got the amp from a previous owner.

It does make the amp prone to tipping over a tad since these amps are not as deep as the piggy back model k100s or the later 150 models.

If I where to do it to another amp I would make a carpeted Dolly framed out such that the amp sits in that frame and can’t slip off the Dolly, but the choice is yours , and yes these amps are surprisingly heavy, especially the 4-10” model like mine.
Just the back on mine with the 4 cast vent frames is crazy heavy all on its own!

Report message to a moderator

Re: Kustom K100-7 Combo Casters? [message #29675 is a reply to message #29669]

Tue, 05 August 2025 15:23

rodak
Messages: 535
Registered: October 2001
Location: Georgia

Senior Member

If you want the same ball casters as used on the piggyback amps, these are virtually exact replacements:

https://www.grainger.com/product/Plate-Caster-Swivel-437V29

www.combo-organ.com

Report message to a moderator

Previous Topic:	1g-1h cabinet need capacitor info
Next Topic:	Info/background please...K200B-2/315 cab

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 09 23:45:13 EST 2025