VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » A-4 plex face reverb problem
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
A-4 plex face reverb problem [message #29711] Sun, 22 March 2026 15:27
slk854 is currently offline  slk854
Messages: 193
Registered: January 2015
Senior Member
It has ben a while since I powered up my A-4 and now when I do the reverb is not working. I think I can hear a faint reverb sound but it is not working like it should. I tightened up all the screws on the xlr plug and also on the connector inside the amp. I pulled the reverb tank and the springs were still connected. I am at a loss now.
Chicago Bill went over the amp several years back and was working but since then it has just been sitting.
Any ideas????
Steve

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K250-1 bass head interference
Next Topic: Help me
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Oct 05 11:48:33 EDT 2026
.:: Contact :: Home ::.

Powered by: FUDforum 3.2.0.
Copyright ©2001-2025 FUDforum Bulletin Board Software