VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Help me (My amp stopped working after I put in downward postition)

Show: Today's Messages :: Polls :: Message Navigator

Help me [message #29713]

Wed, 25 March 2026 23:20

ArtisticBeef
Messages: 1
Registered: March 2026

Junior Member

Hello niche community!
I need help. My kustom III Lead head stopped turning on after the power switch was put in the downward position. I am a noob don’t judge me. I tried checking other outlets because it might be a voltage issue but I’m not sure if that’s the case. The speaker it is connected to looks handmade it was a gift from a friend so that could also be an issue. Everything was working fine and normal before the switch was switched down, sounded great, knobs worked, everything was tight, it just suddenly would not turn on anymore.

Please if anyone has any advice on what to do or how to troubleshoot or where to go I would be eternally grateful. Thank you so much on behalf of all drummers. You guys make the world go around.

Report message to a moderator

Re: Help me [message #29714 is a reply to message #29713]

Thu, 26 March 2026 06:26

stevem
Messages: 4902
Registered: June 2004
Location: NY

Senior Member

Sounds like a simple case of the switch failing.

I would take the amp to a repair tech.

This does not have to be a music store that does repairs, it could be a Hi Fi stereo repair shop.

Report message to a moderator

Previous Topic:	A-4 plex face reverb problem
Next Topic:	K200-B2 Tremolo Problem

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Oct 05 10:44:23 EDT 2026