VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom amp help

Show: Today's Messages :: Polls :: Message Navigator

Kustom amp help [message #3003]

Sun, 17 August 2003 13:02

sunnamp
Messages: 1
Registered: August 2003

Junior Member

Hello fellow kustom kats! I have a question for all in the tech world. I have a few kustom amps and i want to keep them healthy. I was woundering if there is some one with skeematics? <- ( I know I spelt that wrong! ) Please email me if you do, I can give you exact model numbers. I have a 250 bass head, 200 guitar head with reverb trem, I have a 250 head with all the fixings, I also have a 150 head with reverb and trem. Thanks for all those hard core kustom fans!

Report message to a moderator

Re: Kustom amp help [message #3004 is a reply to message #3003]

Tue, 19 August 2003 07:50

stevem
Messages: 4863
Registered: June 2004
Location: NY

Senior Member

Hi. I have SCHEMATICS for the heads you ask about, but I have to ask some questions first. Is the 150 head a metal face like the 250 head, or is it a plexi face like the 200 head. (2) The 250 layout I have is for the head with just reverb and tremlo, not the whole compliment of rev, trem,fuzz and wah.(3) If its a metal face 150 it uses the same circuit boards as the 250 but with 2 less output transistor so if you know what you are doing my 250 driver/output schematic can be used.Send me a large 8 by 11 stamped envelope and I will mail you copys of what I have. Steven Magnotti 548 yorkhill rd yorktown n.y 10598.

Report message to a moderator

Re: Kustom amp help [message #3035 is a reply to message #3004]

Thu, 04 September 2003 16:30

Anonymous

thanks I sent you the envalope!

Report message to a moderator

Previous Topic:	cross ref transistor base configuration
Next Topic:	Speaker out plug

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Jan 25 00:57:58 EST 2026