VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Blown Speakers?

Show: Today's Messages :: Polls :: Message Navigator

Re: Blown Speakers? [message #7437 is a reply to message #7426]

Tue, 05 September 2006 12:45

stevem
Messages: 4904
Registered: June 2004
Location: NY

Senior Member

The cabinets speaker jack mounting plate will say on it what the cab came loaded with if you can still make it out, or if you open up the cab, a CTS speaker will be marked in a white ink stamping with a 137 and then 3 or 4 other digets.
A jensen driver will have on the mounting frame lip 220 and 3 other digets.
Latter cabs that came with eminence drivers will have in black on the magnets the numbers 038.
Altec lansing drivers, should you be so lucky will have a white cast frame, and have the numbers 391 on the mounting lip.

Report message to a moderator

[Message index]

		Blown Speakers? By: twsnell1984 on Mon, 04 September 2006 12:27
		Re: Blown Speakers? By: stevem on Tue, 05 September 2006 07:28
		Re: Blown Speakers? By: twsnell1984 on Tue, 05 September 2006 08:52
		Re: Blown Speakers? By: stevem on Tue, 05 September 2006 12:45
		Re: Blown Speakers? By: twsnell1984 on Tue, 05 September 2006 20:46
		Re: Blown Speakers? By: stevem on Wed, 06 September 2006 07:14
		Re: Blown Speakers? By: twsnell1984 on Wed, 06 September 2006 09:49

Previous Topic:	Need a schematic for an L795RV
Next Topic:	Kustom 200 Bright Switch

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Oct 10 15:53:16 EDT 2026