VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » ohm problems

Show: Today's Messages :: Polls :: Message Navigator

ohm problems [message #9520]

Wed, 16 July 2008 02:54

Forge
Messages: 41
Registered: February 2005
Location: In car trunk in Danville ...

Member

Hey my kustom pals!
Its been a long time since I've had to post here!
on a update I'm now using a K200 w/ 2x15" and a Sunn 0))) concert lead w/ 6x10" for my bass rig

The question is on the Sunn cab. It has the CTS 10s which I think was intended for guitar then bass but they still work really well.

I'm wanting to get more low end SO I thought the first place is to update the speakers, but the problem I keep running into is ohms.

I can't find any good speakers that are 32 ohms. I'm looking at some Mesas that are 16" ohms but if I'm thinking right it would be turn out to be 2 ohms wired parallel. The Sunn amp can only handle 4 ohm max and the cab says its 6 ohms. (however they got that)

Is there a fix or is there any speakers that you can recommend.

The people over at the Sunn forums are not that bright and all they know is there amps are big and loud. SO PLEASE KUSTOM PEOPLE HELP ME!

Bass Rig
Kustom K-200 w/ CTS 2x15"
Sunn Concert Lead w/ CTS 6x10"
Guitar Rig
Sears Silvertone Twin Twelve

Report message to a moderator

[Message index]

		ohm problems By: Forge on Wed, 16 July 2008 02:54
		Re: ohm problems By: stevem on Wed, 16 July 2008 06:47
		Re: ohm problems By: stevem on Wed, 16 July 2008 06:52
		Re: ohm problems By: Forge on Wed, 16 July 2008 14:56
		Re: ohm problems By: Forge on Wed, 16 July 2008 15:10
		Re: ohm problems By: stevem on Thu, 17 July 2008 12:32
		Re: ohm problems By: Forge on Thu, 17 July 2008 22:54

Previous Topic:	K200B-5 with bad RCA Jack ???
Next Topic:	Stupid question regarding K-100-2 vib and reverb.......

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Oct 05 10:43:55 EDT 2026