VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » CTS speaker wiring
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
CTS speaker wiring [message #4687] Fri, 13 August 2004 02:33 Go to previous message
voided3 is currently offline  voided3
Messages: 200
Registered: July 2004
Senior Member
Hello. I own and use a few Kustom CTS loaded bass cabs and was wondering, which side of the speaker does the positive and negative wire connect since they are unlabeled? In my friends 2x15 cabs, when the terminals are facing towards the ground, the red positive wire goes on the right with the black on the left and they work great (you may see in another one of my posts "100 series 1x15 interior insulation" that i mentioned one of them being out of phase until i flipped around the wires as described). My 100 series cab i noticed though has the red wire on the left and the black on the right. The speaker sounds fine, but is it wired properly? Thanks!
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: front screan on 2x12 cab
Next Topic: Naugahyde tears/burns
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Feb 15 05:22:59 EST 2026