VintageKustom.com: Repairing Kustom Amps » Help ,need parts for Hustler amp

Home » VintageKustom.com » Repairing Kustom Amps » Help ,need parts for Hustler amp

Show: Today's Messages :: Polls :: Message Navigator

Help ,need parts for Hustler amp [message #4975]

Thu, 21 October 2004 14:11

musicforgod
Messages: 3
Registered: October 2004
Location: chatham va.

Junior Member

An old friend gave me a Kustom Hustler 24-L amp. It worked great for about two hours then it stopped, I opened up the amp and noticed two wires had either corroded and shorted or heated and shorted out, I stripped back the wires and resoldered the wires back on the parts of which im not sure what they are called, , There are two of them attached to the bottom of the amp board with two bolts and four wires attached ,both parts sit on top of each other, After resoldering ,the wires heated up again and actually remelted the solder, I think the parts are bad, Can anyone help me? I have pictures of the parts if anyone wants me to email them, This is a great looking amp in perfect condition ,(silver metal flake)It was used back in 1970 for about two months and has been sitting since... Any help or advice will be very welcomed!! Thank You ,MusicforGod...

Report message to a moderator

[Message index]

		Help ,need parts for Hustler amp By: musicforgod on Thu, 21 October 2004 14:11
		Re: Help ,need parts for Hustler amp By: stevem on Fri, 22 October 2004 13:35
		Re: Help ,need parts for Hustler amp By: musicforgod on Fri, 22 October 2004 16:29

Previous Topic:	Help! I'm getting shocked! (repost from comment board forum)
Next Topic:	A good upholster in the LA area for Kustom rig

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Jul 14 15:07:52 EDT 2026